Loading a motorcycle into a pickup bed puts a lot of strain on your back and on the bike itself. A folding ramp gives a controlled path from ground to bed, and the right length, width, and surface make that push far steadier. You need a ramp matched to your bike weight, tire width, and tailgate height, because those three measurements decide whether loading feels manageable or awkward. The six options below cover aluminum and alloy steel builds, single-track widths, and different folded sizes for garage or bed storage.
The Picks In Brief
MAXIVAMN Motorcycle Ramp for Pickup Trucks, 750 lb, 7.5 ft
Alloy Steel Motorcycle Ramp 750 Lbs Capacity Folding Loading Ramp
VENDAV Motorcycle Ramp, 440 lb Capacity, Folding Dirt Bike Ramp
VENDAV Dirt Bike & Motorcycle Ramp for Pickup Trucks, 750 lb
Aluminum Motorcycle Ramp, 7.5 ft Folding Dirt Bike Ramp, 750 lb
6.3FT Foldable Motorcycle Loading Ramp, Dirt Bike Ramp 500 lbs
What Each Pick Brings To The Table
Length sets the angle, and 89 inches gives a gentler climb than shorter ramps. You load a full-size street bike with less steep effort, and the 12-inch width keeps a wider tire centered. The aluminum frame keeps the overall weight manageable for one person to position.
Punch plate openings create multiple contact points for the tire, which helps on dusty or damp ground. Folding to about 44.5 inches shortens storage, and a carry handle makes moving the folded unit simpler. Rubber-tipped fingers at the top cushion contact with the tailgate edge.
What Makes Sense
- 750 lb rating suits heavier motorcycles and dirt bikes
- 89 x 12 inch surface gives a clear, defined wheel path
- Punched aluminum drains dirt and water through openings
- Folded length near 44.5 inches fits many truck beds
- Included safety strap helps hold position during loading
Things To Consider
- Tire width needs checking against the 12 inch surface before use
- Firm, level ground matters for a stable loading angle
Steel construction changes the feel compared with the aluminum MAXIVAMN ramp above. The alloy steel frame suits loads beyond motorcycles, including ATVs, lawn mowers, and golf carts in a trailer or garage setting. That broader range makes it a garage workhorse rather than a single-purpose bike ramp.
Expanded size measures 73.11 x 9.05 inches, noticeably shorter and narrower than the 89-inch aluminum options. A hollowed surface helps prevent water pooling and adds friction for the tire. A plate bracket at the front grips the loading edge, and the unit folds to 37.6 inches for storage.
Key Advantages
- Alloy steel frame supports varied equipment types
- Hollowed surface sheds water and adds tire friction
- Plate bracket grips the edge of the loading surface
- Folded size near 37.6 inches saves garage space
Worth Noting
- Recommended loading height stays at or below 31 inches
- Narrow 9.05 inch width limits wider tires
- Gloves help protect hands during folding and unfolding
Who It Suits Best
Households loading mowers, ATVs, or golf carts alongside motorcycles gain the most from the steel build.
Where Another Pick Suits Better
The VENDAV Dirt Bike & Motorcycle Ramp for Pickup Trucks, 750 lb suits wide-tire motorcycles that need a 12-inch surface.
A narrow single-track design defines this VENDAV ramp, with a 6.46 inch inner width guiding the wheel. You haul a lightweight e-bike or bicycle with a dedicated path instead of a wide flat surface. At 84.56 inches long, the angle stays moderate for pickup beds and trailers.
The punched aluminum deck lets dirt and water pass through while giving the tire grip. Dual handles make the folded unit easier to carry, and it folds to about 42.17 inches. A rubber pad at the upper end protects the contact point where the ramp meets the truck.
Real Benefits
- 6.46 inch inner track keeps two-wheel equipment centered
- Punched deck drains debris during outdoor loading
- Dual handles simplify carrying the folded ramp
Trade Offs
- 440 lb rating sits below the 750 lb ramps in this list
- Narrow track suits only narrower tires
Width separates this VENDAV ramp from the narrow 440 lb VENDAV model above. About 11 inches of usable space between side rails accommodates tire treads up to 10.5 inches wide. That extra room helps riders with knobby dirt bike tires keep the wheel aligned during a slow push.
At 89 inches long, the ramp matches the MAXIVAMN length while adding a clear tire-width guide. Punch plate openings raise grip and let debris fall through the surface. Rubber-tipped fingers protect the tailgate contact area, and a load strap reduces movement when attached correctly.
The Helpful Details
- 750 lb rating covers heavier motorcycles and dirt bikes
- Usable width near 11 inches fits wider tire treads
- Raised punched openings improve tire grip on the surface
- Rubber-tipped fingers cushion the tailgate contact point
- Folds to about 44.5 inches for bed or garage storage
Minor Gripes
- Load distribution and correct positioning affect the 750 lb rating
VENDAV Dirt Bike & Motorcycle Ramp for Pickup Trucks, 750 lb
Made For
Riders with wide knobby tires and full-size motorcycles gain the most from the 11-inch usable width.
Consider Something Else When
The 6.3FT Foldable Motorcycle Loading Ramp, Dirt Bike Ramp 500 lbs suits smaller storage spaces with its 41.4-inch fold.
Crossbar rungs replace a flat punched deck here, giving the tire a series of raised bars to bite. You want a gentler angle on a taller truck bed, and the 89-inch length helps keep that climb controlled. An angled lip with rubber-tipped fingers improves contact with the tailgate.
Usable inside width measures about 11 inches between side rails, similar to the VENDAV 750 lb ramp above. A single ramp suits two-wheel loading, while four-wheel vehicles need a pair. The included safety strap helps keep the ramp positioned, and the unit folds to 44.5 x 12 inches.
What Helps Most
- Crossbar rungs add traction on steeper approaches
- Angled lip improves tailgate contact during loading
- 750 lb rating per ramp with even load distribution
- Folded size of 44.5 x 12 inches stores compactly
Small Caveats
- Single ramp does not suit four-wheel vehicles
- Controlled speed and centered wheel keep tracking smooth
- Loading height changes the angle, so measure before use
Shorter than the 89-inch ramps, this aluminum model unfolds to 75.2 inches for a slightly steeper climb. Your storage space stays tight in a small garage, and folding to 41.4 x 6.69 inches helps the ramp tuck into a corner or bed. Raised side edges form a channel that guides the wheel.
Perforated holes provide grip and prevent water from pooling on the surface. Protective pads on the top fingers guard the tailgate from scratches. A heavy-duty safety strap anchors the ramp, and a pair of protective gloves comes in the package for handling.
Everyday Wins
- Compact fold at 41.4 inches suits small storage areas
- Raised edges guide the wheel along a channel
- Protective gloves included for safer handling
Practical Considerations
- Tire width must stay within 5.51 inches for smooth tracking
- 500 lb rating sits below the 750 lb options above
What Matters Most Before Choosing a Bike Ramp for Truck
Length and Loading Height
You measure from ground to tailgate edge before selecting a ramp length. A longer ramp lowers the angle, which makes pushing a heavy bike steadier and reduces scraping risk at the transition point. Shorter ramps save storage space but create a steeper climb that demands more control.
Width, Tire Fit, and Surface
Your tire width decides whether a narrow track or a wide surface works. A channel with raised edges guides the wheel, while punched or crossbar surfaces give the tire grip on damp or dusty ground. Check usable width between rails rather than overall width, because rails reduce the space available for the tire.
Capacity, Material, and Storage
Capacity must cover total equipment weight with margin for uneven distribution during a push. Aluminum keeps weight lower for carrying, while alloy steel suits heavier garage loads such as mowers and ATVs. Folded dimensions then decide whether the ramp fits in a bed, trailer, or garage corner.
Key Considerations Across These Picks
Common Shopping Slip Ups
Shoppers often match capacity but skip tire width and loading height checks. Measuring both before ordering prevents a ramp that looks strong on paper yet fits poorly at the tailgate.
When Paying More Pays Off
Higher-tier ramps in this group add length, wider usable space, and stronger traction surfaces. Those features pay off with taller beds, heavier bikes, and frequent loading rather than occasional use.
Frequently Asked Questions
What ramp length works for a standard pickup bed?
You should measure loading height first, then match length to that height. An 89-inch ramp gives a gentler angle than a 75-inch ramp at the same height.
Can a single ramp load an ATV or mower?
A single ramp suits two-wheel equipment in most listings here. The alloy steel ramp lists broader use, while four-wheel vehicles need a pair of ramps.
How does surface type affect loading?
Your loading height and ground conditions change which surface feels steadier. Punched decks drain debris, crossbar rungs bite on inclines, and raised edges guide the wheel.
What should be checked before loading?
Check equipment weight, tire width, edge fit, and strap anchor point before each load. Firm, level ground and a centered tire keep the climb controlled.
How should a folding ramp be stored?
Folded length ranges from about 37.6 inches to 44.5 inches across these picks. Measure bed space or garage storage before choosing the longer folding options.
Final Thoughts
You get the most value by matching ramp length, width, and capacity to a specific bike and truck combination. The MAXIVAMN and VENDAV 750 lb ramps suit heavier motorcycles, the alloy steel ramp suits varied garage loads, and the compact VENDAV and 6.3FT models suit lighter bikes and tighter storage.